Vtech Sit Stand & Ride Baby Walker User Manual - Page 7

4. To assemble the walker mode, insert the walker legs into the slots on the outer edge on the bottom of the activity panel. The thicker part of the wheels should be facing out. Insert and tighten the two big plastic screws to secure the legs. Check the legs to make sure they are attached securely. To remove the walker legs, loosen the big plastic screws and remove the legs. Please check the screws periodically to ensure they are attached securely. Assembly Instructions 5. To assemble the ride-on mode, you need to criss-cross the left leg over the right leg until you hear the legs click together. Insert the ride-on legs into the middle slots on the bottom of the activity panel. Insert and tighten the two big plastic screws to secure the legs. Check the legs to make sure they are attached securely. To remove the ride-on legs, loosen the two plastic screws and remove the legs. Slide the lock on the underside by the back wheels to separate the criss-crossed legs. Please check the screws periodically to ensure they are attached securely. WARNING: Not to be used by children over 36 months. Insufficient strength. 42 pounds Max. 7