Vtech Smarty s Workshop User Manual - Page 9

ACTIVITIES Exploring Activity 1. After the unit is turned on, it automatically enters the Exploring Activity. 2. Use the HAMMER to pound the 4 lightup nails in the NAIL STATION. You will "Yellow Nail!" hear a sound effect and the light-up nail will flash with the sound. You will see a nail on the LCD SCREEN going down per each activation of the nail. When a nail is pound to its lowest position, Smarty will identify its color. Please Note: Do not put your ears near the nails when the nails are being hit strongly, this could be harmful to your hearing. 3. Use the WRENCH to turn the bolts on "Ten!" the BOLT STATION. As you turn the bolts, you will see the bolt turning on the LCD SCREEN. When a bolt is turned to its lowest position, Smarty will identify its number. 4. Use the SCREWDRIVER to turn the screws on the SCREW STATION. As you turn the screw, you will hear a screw "This is the sound effect and see the screw on the big square screw!" LCD SCREEN turning. If you turn the screw to the right, the screw on the LCD SCREEN will go downward. If you turn the screw to the left, the screw on the LCD SCREEN will go upward. When a screw is turned to its highest or lowest position, Smarty will identify its shape and size. 8