Vtech Three Handset Connect to CELL™ Answering System with Caller ID Use - Page 53
Temporary tone dialing, Hold, Handset locator, PUSH TO TALK
View all Vtech Three Handset Connect to CELL™ Answering System with Caller ID manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Telephone operation Temporary tone dialing If you have pulse (rotary) service only, you can switch from pulse to touch-tone dialing temporarily during a call. This is useful if you need to send touch-tone signals to access your telephone banking or long distance services. During a call: 1. Press . 2. Use the dialing keys to enter the relevant number. The telephone sends touch-tone signals. 3. The telephone automatically returns to pulse dialing mode after you end the call. Hold You can place a home or cell call on hold. You will hear an alert tone if you have not taken the call off of hold after 14 minutes. You will hear another alert tone 30 seconds later. At 15 minutes on hold, the call on hold automatically disconnects. To place a home call on hold: • Press HOLD. Home call on hold appears and /HOME/FLASH flashes. To resume a home call on hold: • Press /HOME/FLASH. To place a cell call on hold: • Press HOLD. Cell call on hold appears and /CELL flashes. To resume a cell call on hold: • Press /CELL. Handset locator This feature helps you find misplaced handsets. To start paging: • Press /FIND HANDSET on the telephone base when it is not in use. All idle handsets ring and display ** Paging **. To end paging: • Press /FIND HANDSET on the telephone base. - OR - • Press /HOME/FLASH, /CELL, , PUSH TO TALK, REDIAL/PAUSE, or any dialing key (0-9, # or ) on the handset. 48