Vtech Tote & Go Laptop refresh User Manual - Page 13
Software Installation, Care & Maintenance, Troubleshooting
View all Vtech Tote & Go Laptop refresh manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
SOFTWARE INSTALLATION / CARE & MAINTENANCE SOFTWARE INSTALLATION Before you can connect the VTech® Tote & Go LaptopTM to your computer, you need to install the software on the VTech® Tote & Go LaptopTM website. To begin the software installation, please go to the http://www.vtechkids.com/download to download the setup file. Once the setup process is complete, connect the VTech® Tote & Go LaptopTM to the computer using a USB cable. Locate the USB port on the left side of your product, and plug the device into your computer's USB port. Note: 1. If the power supply is interrupted during the transfer of data to and from the VTech® Tote & Go LaptopTM, the data on the VTech® Tote & Go LaptopTM may be lost. Before connection, please check and make sure that your batteries are not running low on power. 2. Refrain from unplugging the USB cable during the transfer of data to and from the VTech® Tote & Go LaptopTM. This may cause the data to transfer abnormally or be lost. If the VTech® Tote & Go LaptopTM is connected properly, you will see this picture shown on the screen of your VTech® Tote & Go LaptopTM. Your progress will automatically upload to the computer. And you will be taken directly to the VTech® Tote & Go LaptopTM website, where you can enjoy all of the online features. CARE & MAINTENANCE 1. Keep the unit clean by wiping it with a slightly damp cloth. 2. Keep the unit out of direct sunlight and away from any direct heat source. 3. Remove the batteries when the unit is not in use for an extended period of time. 4. Do not drop the unit on a hard surface and do not expose the unit to moisture or water. TROUBLESHOOTING If for some reason the program/activity stops working, please follow these steps: 1. Turn the unit OFF. 2. Interrupt the power supply by removing the batteries. 3. Let the unit stand for a few minutes, then replace the batteries. 4. Turn the unit ON. The unit should now be ready to play again. 5. If the product still does not work, replace with an entire set of new batteries. 11