Vtech Two Handset Cordless Answering System including a Cordless DECT 6.0 Headse - Page 1
Vtech Two Handset Cordless Answering System including a Cordless DECT 6.0 Headset Manual
View all Vtech Two Handset Cordless Answering System including a Cordless DECT 6.0 Headset manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Quick start guide LS6375-3 (LS6325-2 and IS6100) Introduction This quick start guide provides you with the basic installation and use instructions. A limited set of features are described in abbreviated form. Please refer to the user's manual for complete installation and operation instructions. Telephone base and handset charger installation Install the telephone base and handset charger as shown below. Telephone wall jack Telephone line cord If you have DSL high speed Internet service, a DSL filter (not included) is required. Electrical outlet not controlled by a wall switch Telephone base power adapter Handset charger adapter Telephone base Handset charger Use only the power adapters and batteries supplied with this product. Handset battery installation and charging Install the handset battery as shown below. Once you have installed the handset battery, you may be able to make and receive short calls. For best performance, charge the handset battery continuously for at least 16 hours. 1 Plug the battery connector securely into the socket, matching the color-coded label. 2 Place the battery with the wires inside the battery compartment. 3 Slide the battery compartment towards the center of the handset until it clicks into place. 4 Charge the handset in the telephone base. Charge light remains on when charging.