Vtech Two Handset Expandable Cordless Phone System with Digital Answering System - Page 6

Getting started Telephone base and charger installation Install the telephone base and charger(s) as shown below. The telephone base is designed for tabletop use only. Make sure that the electrical outlet is not controlled by a wall switch. If you subscribe to digital subscriber line (DSL) high-speed Internet service through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Contact your DSL service provider for more information about DSL filters. Telephone base power adapter Electrical outlet not controlled by a wall switch If you have DSL high speed Internet service, a DSL filter (not included) is required. Telephone wall jack Electrical outlet not controlled by a wall switch Telephone line cord Charger adapter Telephone base Charger • Use only the power adapters supplied with this product. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 5959511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. • The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling or an under-the-table/cabinet outlet.