Vtech V.Smile Motion Wireless Controller Pink User Manual - Page 1

Using the V-Motiontm Wireless Controller ( This is an update to page 8 of the User's Manual ) Thank you for purchasing the V-Motiontm Active Learning System. Please read the User's Manual carefully before playing. Connecting to the Console - One-Player Mode • Locate the PLAYER 1/OFF/PLAYER 2 Switch on the bottom of the controller. Move the switch to PLAYER 1. (Figure 3) Note: When only one wireless joystick is connected, please set the controller to PLAYER 1. • Make sure the controller's Motion Sensor Signal is directly facing the V-Motiontm console . (Figure 4) • When the direction lights and the light on the V-Motiontm console stop blinking, the connection is complete. (Figure 5) • Move the PLAYER 1/OFF/PLAYER 2 Switch to OFF when controller is not in use. (Figure 6) (Figure 3) (Figure 4) (Figure 5) (Figure 6) Connecting to the Console - Two-Player Mode • Locate the PLAYER 1/OFF/PLAYER 2 Switch on the bottom of the controller. Move the switch to PLAYER 2. (Figure 7) • Repeat the steps above to be sure the controller is connected for PLAYER 2. (Figure 7) If you have a problem that cannot be solved by using this manual, we encourage you to visit us online or contact our Consumer Services Department with any problems and/or suggestions that you might have. A support representative will be happy to assist you. 91-002299-001-000 (US)