Vtech VT 1901 User Manual - Page 15

GETTING STARTED SETTING UP YOUR VTECH VT 1901 Choose an area near an electrical outlet and a telephone wall jack. AC POWER ADAPTOR Plug the AC power adaptor into an electrical outlet and the DC connector to the back of the base unit. PULSE TONE PULSE SELECTION TONE TELEPHONE WALL JACK DC 9V TEL LINE AC OUTLET HANDSET RINGER The handset ringer is programmed ON as the factory default setting. Refer to PROGRAMMING THE RINGER on page # for more information. SETTING THE TONE/PULSE SWITCH The TONE/PULSE switch is located on the bottom of the base unit and is factory set to TONE. If you have touch tone service, do not change the switch setting. If you have rotary (Pulse) service, set the switch to PULSE. CHARGE THE HANDSET BATTERY PACK BEFORE USE The battery pack recharges automatically whenever the handset is in the base unit. The battery pack must be charged for 16 hours before using your phone for the first time. POWER IN-USE CHARGING SPARE BATT CHARGE THE HANDSET BATTERY PACK FOR 16 HOURS DIGIT CORDLE BEFORE USING CONNECT TELEPHONE LINE CORD Plug one end of the telephone cord into a wall jack, and the other end into the back of the Base Unit. 1901MANUAL 15 15 1/28/99, 3:29 PM