Vtech vt 1030 User Manual - Page 17

Using the phone Call timer Your handset automatically displays the duration of every external call. The call time will remain on the display until 2 seconds after the call has ended. Pressr Right soft key C to delete an incorrect digit. If you have subscribed to a Caller Display service, your caller's number will also be shown. If the number is withheld the display will show WITHHELD. If an exact number match is found in the Directory, the name will .be displayed instead of the number See page 33 for more information. Internal calls When you receive an internal call, the calling handset number will be shown on the handset display. Make a call 1. Press . Enter the telephone number and the number is dialled. Preparatory dialling Use preparatory dialling to see and check the number on the display before you dial out. The display can only show 12 digits at a time, if you enter a number with more than 12 digits, will be displayed to the left of the number to indicate more digits. 1. Enter the number first then press or to dial. End a call 1. Press or place the handset back on the base. Receiving calls When you receive an incoming call, the telephone will ring and the icon will flash. If the ringer is set to off, the phone will not ring but you will hear one short beep tone to alert you. 1. If the handset is not in the base/charger, press or to answer the call. 2. To turn the ringer off when receiving a call press the Left soft key C . The display will briefly show VOLUME OFF . 13