Waring BB185 Instruction Manual - Page 4

Blender, Grounding Instructions - commercial

Page 4 highlights

BLENDER One Quart Capacity Specifications • Ratings 120 VAC- 50/60 Hz- single phase • Motors Permanently lubricated series-wound universal type • Container 44 oz. Polycarbonate or 32 oz. Stainless Steel • Cord 6 foot 18 gauge three conductor grounding cord with strain relief • cETLus listed 120 Volt models GROUNDING INSTRUCTIONS •  F or your protection, Waring® Commercial Blenders are equipped with a 3-conductor cord set. • 120 volt units are supplied with a molded 3-prong grounding type plug and should be used in combination with a properly connected grounding-type outlet, as show in Figure A. If a grounding type outlet is not available, an adapter, shown in Figure B, may be obtained to enable a 2-slot wall outlet to be used with a 3-prong plug. Referring to Figure C, the adapter must be grounded by attaching its grounding lug under the screw of the outlet cover plate. CAUTION: Before using an adapter, it must be determined that the outlet cover plate screw is properly grounded. If in doubt, consult a licensed electrician. Never use an adapter unless you are sure it is properly grounded. NOTE: Use of an adapter is not permitted in Canada.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

BLENDER
ONE QUART CAPACITY SPECIFICATIONS
• Ratings
120 VAC- 50/60 Hz- single phase
• Motors
Permanently lubricated series-wound
universal type
• Container
44 oz. Polycarbonate or 32 oz. Stainless Steel
• Cord
6 foot 18 gauge three conductor grounding
cord with strain relief
C
ETL
US
listed
120 Volt models
GROUNDING INSTRUCTIONS
• For your protection, Waring
®
Commercial Blenders are
equipped with a 3-conductor cord set.
• 120 volt units are supplied with a molded 3-prong grounding
type plug and should be used in combination with a properly
connected grounding-type outlet, as show in Figure A.
If a grounding type outlet is not available, an adapter, shown in
Figure B, may be obtained to enable a 2-slot wall outlet to be
used with a 3-prong plug.
Referring to Figure C, the adapter must be grounded by
attaching its grounding lug under the screw of the outlet cover
plate.
CAUTION: Before using an adapter, it must be determined that
the outlet cover plate screw is properly grounded. If in doubt,
consult a licensed electrician.
Never use an adapter unless you are sure it is properly
grounded.
NOTE: Use of an adapter is not permitted in Canada.