Waring JE2000 Instruction Manual - Page 5
Cleaning & Disassembly
View all Waring JE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
CLEANING & DISASSEMBLY CLEANING a. Unplug the machine from electrical outlet. b. Disassemble all the washable pieces of the machine and rinse in cold water. Note: Never immerse or pour water on the lower part of machine containing motor - clean motor housing using only a wet sponge. c. It is sufficient to put each piece under cold water. Should the machine remain unused for a long time without being washed, use warm water, mild detergent and scrub strainer with cleaning brush provided. d. Important: When using some types of fruits or vegetables, especially carrots, a layer may form which can gradually close the filter. It is necessary to soak the Filter Strainer (017963) at least once a week overnight in water with dishwasher detergent (e.g. 8 tablespoons of "Cascade" or equivalent per gallon). DISASSEMBLY (See Fig. A) 1. Remove plunger. 2. Unlock lock toggle bar (Rotate Up) and remove cover with pulp deflector. 3. Remove shredder and filter strainer by removing shredder hub screw, turning it counterclockwise using tool (017978). Note: Gently holding the top rim of the filter strainer with the opposite hand is usually sufficient for undoing shredder hub screw, but if screw has become stuck, we have provided a locking button. The locking button must be firmly pressed and filter strainer rotated until button engages. This will lock rotary shaft while required torque is applied with Shredder Hub tool to break shredder hub screw loose. 4. Once the screw is removed, shredder, filter strainer and bowl with spout are easily removed simultaneously by lifting vertically off the bowl. 5