Waring MX1000XTX Instruction Manual - Page 12
Do Not Immerse Motor Base In Washing Solution, Rinse
View all Waring MX1000XTX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
To Wash and Rinse Container: 1. REMOVE CONTAINER FROM MOTOR BASE. Remove lid. Rinse container interior and lid under running water. Add washing solution to container. Scrub and flush out the container interior and lid to dislodge and remove as much food residue as possible. Empty container. 2. Wipe down exterior of container with a soft cloth or sponge dampened with washing solution. Wash lid and lid insert in fresh washing solution. Fill container ¼ full with fresh washing solution, cover (with lid only), place on motor base and run on the highest speed for two (2) minutes. Empty container. 3. Repeat step (2) using clean rinse water in place of washing solution. IMPORTANT Note: IN ORDER TO MINIMIZE POSSIBILITY OF SCALDING, TEMPERATURE OF WASHING SOLUTION AND RINSE WATER MUST NOT EXCEED 46˚C, AND QUANTITY USED MUST NOT EXCEED ¼ CONTAINERFUL. IF HIGHER TEMPERATURES OR LARGER QUANTITIES ARE USED, OBSERVE ALL PRECAUTIONS GIVEN IN THE OPERATING MANUAL UNDER "HOT BLENDING INSTRUCTIONS". To Sanitize and Dry Container: 1. Wipe down exterior of container with a soft cloth or sponge dampened with sanitizing solution. 2. Fill container with sanitizing solution, cover, place on motor base, and run on high speed for two (2) minutes. Empty container. Dislodge any residual moisture from blade assembly by placing empty container on motor base and running on the highest speed for two (2) seconds. 3. Sanitize lid and lid insert by immersing in sanitizing solution for two (2) minutes. 4. Do not rinse container, lid, or lid insert after sanitizing is completed. Allow parts to air-dry. To Clean and Sanitize Motor Base: 1. UNPLUG POWER CORD. Wipe down exterior surfaces of motor base with soft cloths or sponges dampened with washing solution, rinse water, and sanitizing solution. Prevent liquid from running into motor base by wringing all excess moisture from cloths or sponges before using them. DO NOT IMMERSE MOTOR BASE IN WASHING SOLUTION, RINSE WATER OR SANITIZING SOLUTION. 2. Allow motor base to air-dry before using. Any other servicing should be performed by an authorized service representative. 12