Waring MX1200XTS Instruction Manual - Page 5
Mx Reprogrammable Control Settings
View all Waring MX1200XTS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
8. Allow motor to come to a complete stop before removing container from blender base. Never place the container on the motor base or remove it from the motor base while motor is running. 9. Wash and dry container after each use. See Cleaning and Sanitizing Instructions. 10. To turn the unit off, press STANDBY button. Green LED light will go off. MX VARIABLE SPEED OPERATION Warning - This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. 1. Before starting, make sure that the blender is unplugged and container is not positioned on the blender. 2. Put ingredients into container and cover it. Do not fill above MAX line. PREP 3. With the unit in STANDBY I position, place container on blender base. Be sure container is fully seated and that drive coupling is properly engaged. Plug blender cord into outlet. 4. This blender has variable speed controls. Set blender to desired speed between 1 and 10. 5. The left paddle switch defaults to the VARIABLE setting in order to use the speed adjustment option. Press right paddle switch up to the ON position. 6. When finished blending, set paddle switch to Standby position. 7. This blender is equipped with a pulse option. Hold left paddle switch in down position to engage pulse function. Unit will run on max speed (30,000 RPM) until the paddle switch is released. 8. Allow motor to come to a complete stop before removing container from blender base. Never place the container on the motor base or remove it from the motor base while motor is running. 9. Always hold container with one hand when starting and while blending. Never operate without jar lid. 10. Wash and dry container after each use. See Cleaning and Sanitizing Instructions. MX Reprogrammable Control Settings 1. Before starting, make sure that the blender is unplugged and container is not positioned on the blender. 2. Put ingredients into container and cover it. Do not fill above MAX line. 3. Place container on blender base. Be sure container is fully seated and that drive coupling is properly engaged. Plug blender cord into outlet. 5