Waring PBB209 Instruction Booklet - Page 4

4. CAUTION: DO NOT use carbonated liquids in the blender jar or any blending container. Using carbonated liquids in the blender jar or any blending container may result in injury. 5. Put ingredients into container, then put on cover. Always add liquid ingredients first, unless otherwise specified in recipe. Always hold container with one hand while blending. 6. CAUTION: To avoid damage to your blender, do not run the blender if the blades become blocked or jammed during use. Turn the blender off immediately, remove the container from the blender base and dislodge the material that is blocking or jamming the blade. How To Assemble Containers with Removable Blades 1. Before starting, make sure that the blender cord is unplugged and that the switch is in the off position. 2. Refer to Figure 1. The following points are important to note when putting together the container assembly: 3. Container gasket must be between the blade assembly and the container. 4. Container collar must not be misthreaded onto the container. 5. Container collar must be securely tightened onto the container Fig.1 before placing food or liquid in the container. 6. Tighten the container collar by holding the container upside down and turning the container collar counterclockwise. 7. Place container assembly on unit base so that it is firmly seated and not tilted to one side. Never place the container collar or the blade assembly on the unit base unless the container has been completely assembled and securely tightened. 6 How To Disassemble & Clean Containers with Removable Blades 1. Be sure the switch is in the off position. 2. Remove the container assembly from the unit base and empty the contents. 3. To disassemble the Waring Pro® Blender container assembly, turn container collar clockwise. 4. The glass container, container collar and blade assembly are dishwasher safe. The plastic container, lid, measuring cup lid insert and gasket must be washed by hand. Allow all parts to air dry, and reassemble for next use. 5. When assembling container after cleaning, be certain all components are in the proper position. 6. It is particularly important to place the container gasket between the blade assembly and the container. 7. Wash and rinse container prior to initial use, and immediately after each use. How To Clean Containers with Nonremovable Blades 1. Remove the container from the unit base. Remove the lid. Add a cup of cleaning solution, made by adding a few drops of dishwashing detergent to 1 cup of cool water, to the container. Scrub and flush out the interior of the container and the lid to dislodge and remove as much residue as possible. Empty the container. 2. Add more cleaning solution. Put lid on container, place container on unit base, and run on high speed for two minutes. 3. Empty the container and repeat as above, using clean rinse water in place of cleaning solution. Empty, rinse and dry, prior to storing unit. 4. Wash and rinse container prior to initial use, and immediately after each use. 7