Waring PCJ218 Instruction Booklet - Page 6

Operating Instructions, Cleaning And Maintenance, Specifications

Page 6 highlights

OPERATING INSTRUCTIONS • With power cord unplugged, assemble all parts per assembly instructions. • Plug power cord into appropriate electrical outlet. • Set switch to ON position and allow a few seconds for motor to reach full speed. • Place halved citrus fruit on rotating reamer and push down firmly. • Set switch to OFF position when finished juicing. CAUTION: Keep fingers from contact with rotating reamer-strainer. CLEANING and maintenANCE • Always unplug appliance before performing any cleaning or maintenance operations. • Clean juicer immediately after each use and prior to initial use as follows: • Remove reamer-strainer and bowl from base. • Rinse reamer-strainer and bowl thoroughly under running water. Wash with warm, soapy water and rinse thoroughly, or place on top rack of dishwasher. • Wipe external surfaces of motor housing with a soft cloth or sponge, dampened with water. DO NOT IMMERSE BASE IN WATER. • Allow all parts to air dry and reassemble. Any other servicing should be provided by an authorized service representative. SPECIFICATIONS Model PCJ201, PCJ218 Power Requirements 120V AC, 60 HZ Power Consumption 1.25 Amps 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

6
OPERATING INSTRUCTIONS
• With power cord unplugged, assemble all parts per assembly
instructions.
• Plug power cord into appropriate electrical outlet.
• Set switch to ON position and allow a few seconds for motor to
reach full speed.
• Place halved citrus fruit on rotating reamer and push down
firmly.
• Set switch to OFF position when finished juicing.
CAUTION: Keep fingers from contact with rotating reamer-strainer.
CLEANING AND MAINTENANCE
• Always unplug appliance before performing any cleaning or
maintenance operations.
• Clean juicer immediately after each use and prior to initial use
as follows:
• Remove reamer-strainer and bowl from base.
• Rinse reamer-strainer and bowl thoroughly under running water.
Wash with warm, soapy water and rinse thoroughly, or place on
top rack of dishwasher.
• Wipe external surfaces of motor housing with a soft cloth or
sponge, dampened with water. DO NOT IMMERSE BASE
IN WATER.
• Allow all parts to air dry and reassemble.
Any other servicing should be provided by an authorized service
representative.
SPECIFICATIONS
Model
PCJ201, PCJ218
Power Requirements
120V AC, 60 HZ
Power Consumption
1.25 Amps