Waring WCT820 Instruction Manual - Page 5
Special Cord Set Instructions, Operation
View all Waring WCT820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Special Cord Set Instructions A short power-supply cord is provided to reduce the risks result from becoming entangled in or tripping over a longer cord. Longer extension cords may be used if care is exercised in their use. If a long extension cord is used, the marked electrical rating of the extension cord must be at least as great as the electrical rating of the appliance, and the longer cord should be arranged so that it will not drape over the countertop or table top where it can be pulled on by children or tripped over. If the appliance is of the grounded type, the extension cord should be a grounding type 3-wire cord Operation 1. Put toaster on counter or flat, dry surface near electrical outlet. 2. Place bread in all the slots, set both browning controls and push down the carriage control levers. The toasted bread will automatically rise when the bread cycle is complete. 3. The regular slots toast both sides of bread, while bagel slots toast only on one side. 4. To stop toasting mid-cycle, just lift up the carriage control lever. 5. WCT810/WCT815/WCT815B: The sliced side of bagels and buns needs to face to the left. Arrows on toaster indicate toasting side. WCT820/WCT825/WCT825B: The sliced side of bagels and buns should follow the diagram on the top panel of the toaster. WCT850: To toast both sides of bread, switch must be positioned on the bread selection. To toast only one side, switch must be positioned on the bagel selection. The sliced side of bagels and buns should follow the diagram on the top panel of the toaster. CAUTION: The removable crumb tray must be completely inserted before toaster can be operated. If the tray is removed for cleaning, ensure that it is replaced before using toaster. Crumb tray is dishwasher safe. 5