Waring WMB400X Instruction Manual - Page 7

To help remove oil buildup and batter residue, place a damp paper towel in between the waffle plates and close the lid. Allow to sit for a few minutes. To clean exterior, wipe with a soft, dry cloth. Never use an abrasive cleanser or harsh pad. NEVER IMMERSE CORD, PLUG OR UNIT IN WATER OR OTHER LIQUIDS. Serviceable Plates To order replacement plates, call customer service at 1-800-4WARING, order online or find a local distributor or service center. Although removable, these plates are not intended to be removed for routine cleaning. Plates are ONLY meant to be removed if there is a scratch on the nonstick coating and you need to replace the plate. If removed for cleaning, the plates are dishwasher safe. How to Remove the Waffle Plates PARTS • 2 waffle plates • 4 large screws (2 extra) • 16 small screws (6 extra) • Screwdriver INSTRUCTIONS 1. Carefully unpack the replacement kit. 2. Using the provided screwdriver, carefully remove the screws from the perimeter edge of waffle plate/s. Lift plates up and off the housing. Slight force may be needed to release the plates completely. Discard the old plate/s and screws. 3. Starting with the lower grid, place the new plate onto the housing by aligning rear and front projections onto the base. The wider projections will fit into the rear. 4. Install 1 large screw into the slot located near the handle. 5. Install the smaller screws around the perimeter. 6. Repeat steps 2-5 for the upper grid replacement. 7