Waring WSD1G Instruction Manual - Page 1
Waring WSD1G Manual
View all Waring WSD1G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
WSD1G Series - 1 Gallon Syrup Dispenser Instructions To ensure proper operation and equipment life, please follow the instructions below for assembly, cleaning and maintenance. Be sure to clean syrup dispenser thoroughly before first use and after each use. Daily cleaning is recommended. ASSEMBLY 1. Remove the syrup dispenser from the packaging. 2. Rinse and dry syrup dispenser and lid before using. Wash using a mild soap and water solution with sponge. Take care when cleaning around the graphic overlay. 3. Place syrup dispenser on a sturdy, level surface, away from the edges of the countertop. 4. Place the syrup pump inside the syrup bottle and screw it on until tight. 5. Place the syrup bottle into the dispenser with the pump facing forward. 6. Place the lid onto the top of the dispenser housing. CLEANING & MAINTENANCE 1. Remove the lid. 2. Wash the lid and internal housing with a warm water and soap solution using a sponge or nonabrasive cloth. Take care when cleaning around the exterior graphic label. 3. Remove the syrup container from the dispenser housing. 4. Thoroughly rinse the syrup pump with a warm water and soap solution.