Weber Ducane Affinity 4100 NG Owner Manual - Page 27

properly over the valve orifices 2. Check proper assembly

Get Weber Ducane Affinity 4100 NG PDF manuals and user guides View all Weber Ducane Affinity 4100 NG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

ANNUAL MAINTENANCE Replacing the Main Burners 1. Your Ducane® gas barbecue must be "OFF" and cool. 2. Turn "OFF" gas at source. 3. Remove the cooking grate and the heat distribution plates, exposing the burner tubes. 4. Remove front panel knobs, bezels and igniter Module for electronic ignition for the burners. 5. Then remove the front panel. See: Inspection of the Spider/Insect Screens for removal of the burner tube. To reassemble, reverse steps 3 through 5 above. ƽ CAUTION: The burner openings (1) must be positioned properly over the valve orifices (2). Check proper assembly before fastening manifold/front panel in place. ƽ WARNING: After reinstalling the gas lines, they should be leak checked with a soap and water solution before using the barbecue. 1 2 2 1 Battery Replacement of Burner Igniter Unscrew the push button igniter and remove the old battery and replace with a new one. Requires 1 "AAA" alkaline battery. The shrink wrap must be removed from the battery before installation. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
27
Battery Replacement of Burner Igniter
Unscrew the push button igniter and remove the old battery and replace with a new
one. Requires 1 “AAA” alkaline battery. The shrink wrap must be removed from the
battery before installation.
Replacing the Main Burners
1. Your Ducane
®
gas barbecue must be “OFF” and cool.
2. Turn “OFF” gas at source.
3. Remove the cooking grate and the heat distribution plates, exposing the burner
tubes.
4. Remove front panel knobs, bezels and igniter Module for electronic ignition for the
burners.
5. Then remove the front panel.
See:
Inspection of the Spider/Insect Screens
for removal of the burner tube.
To reassemble, reverse steps 3 through 5 above.
±
CAUTION: The burner openings (1) must be positioned
properly over the valve orifices (2). Check proper assembly
before fastening manifold/front panel in place.
±
WARNING: After reinstalling the gas lines, they should be
leak checked with a soap and water solution before using
the barbecue.
ANNUAL MAINTENANCE
ANNUAL MAINTENANCE
1
2
2
1