Weber Genesis 1500 LX Owner Manual - Page 26
OPERATING INSTRUCTIONS, Lighting, Crossover Ignition System, To Extinguish
View all Weber Genesis 1500 LX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
OPERATING INSTRUCTIONS Lighting Summary lighting instructions are on the control panel. ƽ DANGER Failure to open lid while igniting the barbecue, or not waiting 5 minutes to allow the gas to clear if the barbecue does not light, may result in an explosive flame-up which can cause serious bodily injury or death. Crossover Ignition System Note - The Crossover Ignition System ignites the Front burner with a spark from the igniter electrode inside the Gas Catcher Ignition Chamber. You generate the energy for the spark by pushing the Crossover Ignition Button until it clicks. ƽWARNING: Check gas supply line before each use of barbecue for nicks or cracking. If the gas supply line is found to be damaged in any way, do not use the barbecue. Replace using only Weber authorized replacement gas supply line. Order from WeberStephen Products Co., Customer Service Center. Crossover Ignition System 1 1) Open the lid. Figure 1. 2) Make sure all burner control knobs are turned OFF. (Push each burner control knob down and turn clockwise.) 3) Turn gas supply valve on. ƽWARNING: Do not lean over open barbecue. Keep your face and body at least one foot away from the matchlight hole when lighting the barbecue. 4) Push Front burner control knob down and turn to START/ HI. 5) Push the Crossover Ignition Button several times, so it clicks each time. 6) Check that the burner is lit by looking through the matchlight hole on the front of the cooking box. ƽWARNING: If the burner does not light, turn the Front burner control knob to OFF and wait 5 minutes to let the gas clear before you try again or try to light with a match. 7) After the FRONT burner is lit you can turn on the other burners. Note - Always light the FRONT burner first. The other burners ignite from the FRONT burner. To Extinguish Turn gas supply OFF at the source, then push down and turn each burner control knob clockwise to OFF. 2 7 5 6 4 Figure 1 26