Weber Genesis 3 NG Owner Manual - Page 7
Assembly
View all Weber Genesis 3 NG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Assembly Tools needed Regular screwdriver Phillips screwdriver Hammer Step 1 Check package contents Cooking box (assembly) 7/16 inch or an adjustable wrench Pliers Lid (assembly) ® ® Block of wood Supplies needed You will need a soap and water solution to check for gas leaks. (See Step "Check for gas leaks.") Note - The hardware size of nuts, bolts and screws is given. For example "1/4-20 x 2 inch bolt" means a bolt 1/4 inch in diameter with 20 threads to the inch, 2 inches long. On a small screw for example, "6-32 x 1/2 inch screw" means a number 6 screw, with 32 threads to the inch, 1/2 inch long. While we give much attention to our products, unfortunately an occasional error may occur. If a part is missing, do not go back to the store. Call the Weber Customer Service Center toll free 1-800-446-1071 to receive immediate assistance. Have your owner's manual and serial number of the barbecue available for reference. Hose Bottom tray Work table Two accessory trays Swing table 7