Weber Genesis Silver C NG Owner Manual - Page 21

Install Flavorizer® Bars and Cooking Grates, Installing the Warm-Up” Basket

Page 21 highlights

Connect the side burner hose as follows: 1) Slide back the collar of the quick disconnect on the manifold. 2) Push the male fitting of the side burner hose into the quick disconnect, and maintain pressure. Slide the collar closed. Quick disconnect will be engaged. Check to be sure that the side burner valve is OFF. Set the cooking grates onto the ledges in the cooking box with the rounded sides up. Installing the Warm-Up" Basket You will need: Warm-Up Basket Insert one end of the Weber Warm-Up Basket into the hole at the right side of the inside of the lid, and the other end into the slot at the left side of the lid. Install Flavorizer® Bars and Cooking Grates You will need: five Flavorizer Bars and two cooking grates. Place the Flavorizer Bars side by side in the cooking box. Installing the warming rack You will need: warming rack. Set the warming rack into the slots at the rear of the cooking box. C-4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

C-4
Installing the Warm-Up” Basket
You will need: Warm-Up Basket
Insert one end of the Weber Warm-Up Basket into the
hole at the right side of the inside of the lid, and the
other end into the slot at the left side of the lid.
Install Flavorizer® Bars and Cooking Grates
You will need: five Flavorizer Bars and two cooking
grates.
Place the Flavorizer Bars side by side in the cooking
box.
Installing the warming rack
You will need: warming rack.
Set the warming rack into the slots at the rear of the
cooking box.
Set the cooking grates onto the ledges in the cooking
box with the rounded sides up.
Connect the side burner hose as follows:
1)
Slide back the collar of the quick disconnect
on the manifold.
2)
Push the male fitting of the side burner hose
into the quick disconnect, and maintain
pressure. Slide the collar closed.
Quick disconnect will be engaged.
Check to be sure that the side burner valve is OFF.