Weber Summit 650 LP Owner Manual - Page 16

GENERAL MAINTENANCE 11. Lift and twist the burner assembly slightly to separate the crossover tube(1) from the burners. Remove the burners from the cooking box. Separate here Crossover® Ignition System Operations If the Crossover Ignition System fails to ignite the Left burner, light the Left burner with a match. If the Left burner lights with a match, then check the Crossover Ignition System. • Check that both the white(1) and black(2) ignition wires are attached properly. (1) 12. To reinstall the burners, reverse steps 3 through 11. ƽ CAUTION: The burner openings must be positioned properly over the valve orifices. Figure 15 (a). Check proper assembly before fastening manifold in place. Figure 15 (b). (a) Valve (1) (2) • Check that the Crossover Ignition button pushes the igniter (button) down, and returns to the up position. • Check to see if the igniter is loose in the frame. Tighten if necessary; See Step "Install igniter" for correct procedure. If the Crossover Ignition System still fails to light, Contact the Customer Service Representative in your region using the contact information sheet provided with your manual. Burner Orifice (b) Figure 15 16