Weber Summit Platinum A6 LP Owner Manual - Page 24
Rotisserie Assembly
View all Weber Summit Platinum A6 LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
24 OPERATING INSTRUCTIONS ROTISSERIE ASSEMBLY Parts required: rotisserie motor bracket(1), rotisserie motor(1), rotisserie shaft(1), spit forks(4) and fork screws (4). 1) Install the motor bracket Attach the stainless steel motor bracket to the left side of the cooking box, using the 1/4-20 fasteners and the 1/4-20 Keps nuts. 2) Attach the motor. Slide the motor onto the motor bracket. 3) Put the spit forks on the rotisserie shaft. Slide a spit fork from each side onto the shaft so that the tines are facing each other. Reverse forks to each other so that one fork screw is on top(1) and one is on the bottom(2), as shown in illustration. Screw in the split fork screws to hold the forks in place. 4) Insert the rotisserie shaft in the motor. Insert the pointed end of the rotisserie shaft into the motor. 5) Set the rotisserie shaft onto rotisserie support block. Place the handle (3) end of rotisserie onto the support notch. SUMMIT® D (1) (2) (3)