Weider 132 Training English Manual - Page 6
Frame, oriented, shown., Support, Brackets, Attach, Frame, Bolts, and two, Nylon, Locknuts, Insert,
View all Weider 132 Training manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3. Be sure that the "H"-Frame (1) is oriented as shown. The Support Brackets (12) must be on 3 the side shown. Attach the Frame (2) to the "H"- Frame with two M8 x 56mm Bolts -(15) and two M8 Nylon Locknuts (19). Insert the Weight Rests (29) into the "H"-Frame (1). The high side of the Weight Rests must be 29 on the side indicated. 2 15 High Side of Weight Rests 19 29 12 4. Tap two 38mm Square Inner Caps (22) into the Leg Lever (4). Tap a 1" Round Inner Cap (24) into ♦the indicated end of the weight tube. Tap the 1" Angled Round Cap (20) onto the other end of the weight tube. Slide the Weight Stop (26) onto the weight tube. 5. Lubricate the M10 x 56mm Bolt (14). Attach the Leg.Lever (4) to the Frame (2) with the Bolt and the M10 Nylon Locknut (18). 4 4, 0 22 0 20 26 0 0 4 Weight Tube 22 5 14-Lubricate 2 4 *-18 0 6