Weider 135 Bench English Manual - Page 6
Attach the Leg Lever 4 to the Front Leg 8
View all Weider 135 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3. Attach the Front Leg (8) to the Frame (2) with two 3 M8 x 43mm Bolts (39), four M8 Washers (16), and two M8 Nylon Locknuts (17). Note: Do not 39 16 tighten the Locknuts yet. 2 16 16 17 8 4. Attach the Frame (2) to the Crossbar (3) with two 4 M8 x 55mm Bolts (18), the Support Plate (38), and two M8 Nylon Locknuts (17). Tighten the Nylon Locknuts (17, 33) used in steps 1-4. 2 18 38 17 3 5. Tap two 30mm Square Inner Caps (22) into the 5 ends of the Leg Lever (4). Tap a 25mm Round Inner Cap (24) into the indicated end of the weight tube on the Leg Lever (4). Tap the 25mm Round Angled Cap (20) onto the other end of the weight tube. 6. Lubricate the M10 x 63mm Bolt (32) with grease. 6 Attach the Leg Lever (4) to the Front Leg (8) with the Bolt and an M10 Nylon Locknut (33). Note: Do not overtighten the Locknut; the Leg Lever must be able to pivot easily. 22 24 Weight Tube 4 20 22 32 4 Lubricate 33 8 6