Weider 155 Bench English Manual - Page 12

PART IDENTIFICATION CHART Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached. M10 Washer (11) M8 Washer (31) M6 Washer (32) M8 Nylon Locknut (30) M10 Nylon Locknut (15) M8 x 15mm Screw (34) M6 x 16mm Screw (36) M6 x 38mm Screw (39) M8 x 45mm Bolt (33) M8 x 53mm Bolt (38) M10 x 55mm Bolt (35) M8 x 55mm Bolt (37) M10 x 160mm Bolt (27)