Weider 175 English Manual - Page 12
Attach the Curl Pad 44 to the Curl Post 42
View all Weider 175 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
18. Attach the Curl Pad (44) to the Curl Post (42) with 18 two M6 x 16mm Screws (3). 44 3 42 19. Press a 1Ó Round Inner Cap (32) into the end of each 19 Weight Rest (21). Insert the Weight Rests (21) into one set of holes in the Uprights (1). Turn each Weight Rest until the locking clip snaps into place around the Upright. Make sure both Weight Rests are set at the same height. 32 21 1 1 32 21 20. Make sure all parts are properly tightened before you use the weight bench. The use of all remaining parts will be explained in ADJUSTING THE WEIGHT BENCH starting on the next page. 12
12
18.
Attach the Curl Pad (44) to the Curl Post (42) with
two M6 x 16mm Screws (3).
18
42
3
44
19.
Press a 1° Round Inner Cap (32) into the end of each
Weight Rest (21).
Insert the Weight Rests (21) into one set of holes in
the Uprights (1). Turn each Weight Rest until the lock-
ing clip snaps into place around the Upright.
Make
sure both Weight Rests are set at the same
height.
19
32
21
32
21
1
1
20.
Make sure all parts are properly tightened before you use the weight bench. The use of all remaining
parts will be explained in ADJUSTING THE WEIGHT BENCH starting on the next page.