Weider 8700 I English Manual - Page 10

7. Attach the Top Frame (4) to the Upright (3) with two M10 x 67mm Bolts (71), two M10 Washers 7 (57), and two M10 Locknuts (56). Do not tighten the Locknuts yet. Attach the Top Frame (4) to the Weight Guides (21) with two M10 x 25mm Screws (74). Do not tighten the Screws yet. See steps 2 to 7. Tighten the M10 Locknuts (56) and the M8 Locknuts (58). 71 57 4 56 56 3 74 21 8. Attach the Leg Bumper (60) to the Front Leg (7) with an M4 x 20mm Self-tapping Screw (69) and 8 an M4 Washer (33). Make sure that the end of the Leg Bumper is pointing upward. 7 60 33 69 9. Apply grease to an M10 x 64mm Bolt Set (76). 9 Attach the Leg Lever (8) to the Front Leg (7) with the M10 x 64mm Bolt Set (76). Make sure that the barrel of the Bolt Set is inserted through both sides of the bracket on the Front Leg. 76 Grease 7 8 76 10