Weider Black 160 Xtb Treadmill English Manual - Page 9

4. Have a second person hold the console assembly near the Uprights (73, 74). 4 Console Assembly Connect the Upright Wire Harness (75) to the Console Wire Harness (71). Make sure to con- nect the connectors properly (see the inset drawing). The connectors should slide to- gether easily and snap into place. If they do not, turn one connector and try again. IF THE 73 CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAM- AGED WHEN THE POWER IS TURNED ON. 75 71 75 71 74 5. Connect the TV Cable (49) and the AV Cable (97) to the cables extending from the console assembly. Then, insert the connectors down into the Uprights (73, 74). 5 99 Next, insert the brackets on the Handrails (99) into the Right Upright (74) and the Left Upright (73). Make sure that no wires are pinched. 97 49 73 99 74 6. Finger tighten three Handrail Bolts (64) with three Star Washers (90) into the Right Upright (74). Next, finger tighten three Handrail Bolts with three Star Washers (not shown) into the Left Upright (73). Then, firmly tighten the six Handrail Bolts. 6 73 90 64 64 90 74 9