Weider E8000 Gym Owners Manual - Page 6
Alelitir., FRONT
View all Weider E8000 Gym manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
WEIDER HEALTH and FITNESS STEP 1 BASE & FRAME UPRIGHT ASSEMBLY Alelitir. .. ' -:MIN;Taii* 61 1/4" X $ VC CARRIAGE BOLT . 1 62 5/18' X 2 3/4" CARRIAGE BOLT 8 64 SAW X 29/4' HEX HEAD BOLT 2 61 BACKING PLATE 4 72 S/16" NYLON LOCK NUT 8 88 1/4' NYLON LOCK NUT 1 93 2' SQUARE PLASTIC INSERT CAP 1 , 94 2' SQUARE PLASTIC COVER CAP 5 PAGE 5 BRACE EXTENSION CAUTION: DO NOT TIGHTEN THE BOLTS IN THE ASSEMBLIES OF STEP 1 AND STEP 2 UNLESS YOU ARE INSTRUCTED TO DO SO IN.THAT ASSEMBLY BOX. YOU WILL BE 3 INSTRUCTED TO TIGHTEN THE BOLTS AFTER STEP 2 ASSEMBLIES ARE COMPLETED. Begin by capping each tubing end of BASE FRAMES (1F) and (18) -with 2" SQUARE 72 COVER CAPS (94). • Attach the BASE FRAME (19 to BASE FRAME (18) by assembling two 5/16" X 2 3/41 CARRIAGE BOLTS (62) Into a BACKING PLATE (69) and bolting up through the bottom of the BASE FRAME (16) and then through the welded bracket of the BASE FRAME (1F). Secure with 5/16" NYLON LOCK NUTS (72). REAR 94 1B 69 e 1 7 C 69 u To the BASE FRAME (1F) assemble ARM PRESS FRAME UPRIGHT (2) so that the weldeded brackets and the Brace Extension are aligned to the top and the front. Assemble 62 two 5/16" X 2 3/46 CARRIAGE BOLTS (62) 62 Into a BACKING PLATE (69) and bolt up through the bottom of the Base Frame and then into the Arm Press Frame Upright. Secure with 5/16" NYLON LOCK NUTS (72). 2 72 69 9 72 0 72 FRONT 6 61 64 4 00 C F72 CO 64 88 *.# 93 4 94 CROSS TUBE 69 62 To rear of BASE FRAME (19 attach the STEPPER FRAME UPRIGHT (3). Again assemble two 5/16" X 2 3/41CARRIAGE BOLTS (62) Into a BACKING PLATE (69) and bolt up through the bottom of the Base Frame and then into the Stepper Upright. Secure with 5116" NYLON LOCK NUTS (72). Insert the legs of the SEAT BRACE (5) into the holes in theends of the BASE FRAME CROSS TUBE (1). With the welded leg curl brackets of (he SEAT FRAME (4) oriented up, attach the Seat Frame to the ARM PRESS FRAME UPRIGHT (2) using 5/16' X 2 3/4' HEX HEAD BOLTS (64) to bolt through the welded bracket on the Seat Frame, then through the Arm Press Upright, and finally through a BACKING PLATE (69). Secure with S/16" NYLON LOCK NUTS (72). Cap end of Seat Frame with 21SQUARE PLASTIC INSERT CAP (93). PALttAacThEt(h6e),SSEEAATTBFRRAACMEE(5(4))t,oaSnEdAthTeFnRSAEMAET(B4R) bAyCbEol(t5in) gan1d/4s'eXcu3ri1n/g4"asCsAemRRblIyAwGiEthB1O/4L"TN(Y6L1O) tNhrLoOugChKSNEUATT MOUNTING (88).