Weider Flex Gym 2000 English Manual - Page 9

11. Attach the Leg Lever (10) to the Rail Leg (9) using 11 an M10 x 67mm Bolt (48) and an M10 Nylon Locknut (42). 42 10 48 9 12. Attach the Backrest Rails (22) to the Backrest (13) as indicated using four M6 x 16mm Screws (31). 12 Make sure the Backrest Rails are oriented exactly as shown. 13 Attach the Backrest Bracket (23) to the Backrest (13) using two M4 x 25mm Screws (57). When attached, the Backrest Bracket should be flush with the ends of the Backrest Rails (22). Wide End With the Backrest (13) oriented as shown, slide the Long Lock Pin (59) through the holes in the Backrest Rails (22) and through the front holes in the Seat Carriage (11). 22 31 23 31 57 13. Place one end of the Long Cable (18) in a Pulley Bracket (49). Secure one of the three Cable Pulleys (50) to the Pulley Bracket using an M10 x 27mm Bolt (51) and an M10 Nylon Locknut (42). Attach the Pulley Bracket to the Left Brace (5) using an Eyebolt (53) and an M8 Nylon Locknut (37). Attach a Pulley Bracket (49) and a Cable Pulley (50) to the opposite end of the Long Cable (18) and attach it to the Right Brace (4) in the same manner. 11 59 13 51 49 53 50 42 18 5 37 53 49 51 50 4 42 9