Weider Pro 205 English Manual - Page 7
Lubricate an M10 x 75mm Bolt 5. Attach the Leg
View all Weider Pro 205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
7. Press two 38mm x 50mm Inner Caps (16) into the Leg Lever (23). Press a 1" Round Inner Cap (14) into the Leg Lever. Press a 1" Angled Round Cap (11) onto the Leg Lever. Lubricate an M10 x 75mm Bolt (5). Attach the Leg Lever (23) to the Front Leg (20) with the M10 x 75mm Bolt and an M10 Nylon Locknut (4). Do not overtighten the Nylon Locknut. Slide the Weight Stop (28) onto the Leg Lever (23). 7 5 Lubricate 8. Attach both Backrest Brackets (12) to the Backrest (15) with four M6 x 16mm Screws (6). The 8 Backrests must be oriented as shown. 6 4 20 11 23 16 14 28 16 15 9. Lubricate an M8 x 75mm Bolt (29). Attach the Backrest Brackets (12) to the Bench Frame (19) 9 with the M8 x 75mm Bolt and an M8 Nylon Locknut (7). Do not overtighten the Nylon Locknut. Rest the Backrest Brackets (12) on the Adjusment Tube (13). 12 6 13 12 7 19 29 Lubricate 7