Weider Pro 390 L Bench English Manual - Page 5

PART IDENTIFICATION CHART Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST near the end of this manual. IMPORTANT: If you cannot find a part in the hardware kit, check to see if it has been preassembled. If a part is missing, please call 1-877-992-5999. To avoid damaging parts, do not use power tools for assembly. M10 x 180mm Bolt (54) M10 x 192mm Bolt (43) M10 Washer (35) M8 Washer (36) M6 Washer (42) M6 x 16mm Screw (39) M10 x 18mm Screw (34) M10 Curved Washer (58) ST4.2 x 20mm Screw (53) ST4.2 x 16mm Screw (17) ST3.5 x 13mm Screw (10) ST4.2 x 10mm Screw (59) M10 Locknut (37) M6 x 38mm Screw (41) M8 x 65mm Screw (56) M10 x 65mm Carriage Bolt (40) M10 x 85mm Bolt (45) M10 x 85mm Carriage Bolt (55) M10 x 101mm Bolt (38) M10 x 110mm Bolt (44) 5