Weider Pro 9625 English Manual - Page 11
Washer
View all Weider Pro 9625 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
21. Wrap the Medium Cable (23) around a 3 1/2" Pulley (15). Attach the Pulley to the Top Frame (55) with a 3/8" x 1 3/4" Bolt (87) and a 3/8" Nylon Locknut (21). 21 ..." 87- - . - .\ ► 55 c -21 lwjJ 15 ----ftr. 22. Wrap the Medium Cable (23) around a 3 1/2" Pulley (15). Attach the Pulley to the Top 22 Frame (55) with a 3/8" x 1 3/4" Bolt (87) and a 3/8" Nylon Locknut (21). 23 0 0 0 55 21 ., , 87 - % 15 ill 23 23. Attach the Medium Cable (23) to the Small "U"-Bracket (67) with a 1/4" Nylon Locknut (2) 23 and a 1/4" Flat Washer (10). Do not com- pletely tighten the Nylon Locknut. It should be threaded onto the end of the Cable only a couple of turns, as shown in the inset drawing. Iii 23 10 23 . b 67 2 10 24. Locate the Short Cable (58). Attach the Short Cable to the Rear Upright (56) with a 5/16" x 3" Bolt (93), a 5/16" Flat Washer (8), and two 5/16" Nylon Jam Nuts (84). The end of the Cable must be between the two Nylon Jam Nuts and there must be enough room between the Nylon Jam Nuts for the end of the Cable to pivot. Wrap the Short Cable (58) around a 3 1/2" Pulley (15). Attach the Pulley and a Cable Trap (66) to the Squat Arm (79) with a 3/8" x 3 3/4" Bolt (71), a 3/8" Flat Washer (9), and a 3/8" Nylon Lock Nut (21). The Cable Trap must be turned to hold the Cable in place. 67 24 79 2 21 ° 9 58 15 66 , ' , . , ,- . 8 56 0 93 o 71 84 11