Weider Pro 9725 English Manual - Page 6
Stabilizer
View all Weider Pro 9725 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
5. Set two Weight Bumpers (19) onto the bracket on the Stabilizer (5). Insert both Weight Guides 5 through the Weight Bumpers and the bracket on the Stabilizer. Be sure that the drilled holes in the Weight Guides are at the top, as shown. Press a 1" Round Cover Cap (70) onto the bottom of each Weight Guide (62). Slide eight Weights (25) on the Weight Guides (62). Be sure that all of the Weights are turned so the pin grooves are on the same side. Drilled holes must be at the top 62 Pin Grooves must be on this side CD 25 6. Press the Weight Tube Bumper (64) into the GI IL/ VI 11 16 vvGlyl /C7\ IL I UGG "...SG, 1110 6 Weight Tube into the stack of Weights (25). Be sure that the pins on the Weight Tube are resting in the pin grooves in the upper Weight. Lubricate the insides of the holes in the Top Weight (76). Slide the Top Weight onto the Weight Guides (62) and set it on the stack of Weights (25). 0 70 Lubricate 63 19 5 70 -7n 62 Pins 64 25 cD Press a 2" Square Inner Cap (27) into each end of the Top Frame (55). Press a 1 3/4" Square Inner Cap (44) into each end of the crossbar on the Top Frame. Press two 1" Round Inner Caps (49) into the top of the crossbar. Attach the Top Frame (55) to the Front Upright (42) and the Rear Upright (56) with four 5/16" x 2 3/4" Bolts (11), four 5/16" Flat Washers (8), and four 5/16" Nylon Locknuts (3). 6 7 11 27 8 55 44 3 56 3 11 27 49 44 27 Crossbar 42