Weider Pro 9930 User Manual - Page 12

Attach the Small U-Bracket 43 to the Weight Tube - weights

Get Weider Pro 9930 PDF manuals and user guides View all Weider Pro 9930 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

19. Wrap the Medium Cable (72) over a 4 1/2" Pulley (34) in the direction shown. Attach the Pulley to the 19 64 Butterfly Top Frame (64) with a 3/8" x 1 3/4" Bolt (22) and a 3/8" Nylon Locknut (4). 22 4 34 72 20. Attach the threaded shaft on the Medium Cable (72) to the Small "U"-Bracket (43) with a 1/4" Flat Washer 20 (11) and a 1/4" Nylon Locknut (16). Note: See the 72 inset drawing. Do not completely tighten the Nylon Locknut; it should be threaded only two turns onto the end of the Cable. Attach the Small "U"-Bracket (43) to the Weight Tube (77) with a 5/16" x 1 3/4" Bolt (9) and a 5/16" Nylon 2 43 11 16 9 77 72 Locknut (2). 11 16 43 21. Identify the Long Cable (73). It has a ball on one 21 end and a loop on the other. Route the end with the loop through the slot in the cable guide on the Butterfly Base (61). Route the Long Cable (73) under a 3 1/2" Pulley (5) as shown. Attach the Pulley and a Cable Trap (39) to the indicated bracket on the Butterfly Base (61) with a 3/8" x 2" Bolt (35) and a 3/8" Nylon Locknut (4). Make sure the Cable Trap is oriented as shown. 4 Cable Guide 73 61 5 35 39 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
12
20. Attach the threaded shaft on the Medium Cable (72)
to the Small “U”-Bracket (43) with a 1/4” Flat Washer
(11) and a 1/4” Nylon Locknut (16).
Note: See the
inset drawing. Do not completely tighten the
Nylon Locknut; it should be threaded only two
turns onto the end of the Cable.
Attach the Small “U”-Bracket (43) to the Weight Tube
(77) with a 5/16” x 1 3/4” Bolt (9) and a 5/16” Nylon
Locknut (2).
19. Wrap the Medium Cable (72) over a 4 1/2” Pulley
(34) in the direction shown. Attach the Pulley to the
Butterfly Top Frame (64) with a 3/8” x 1 3/4” Bolt (22)
and a 3/8” Nylon Locknut (4).
21.
Identify the Long Cable (73). It has a ball on one
end and a loop on the other.
Route the end with the
loop through the slot in the cable guide on the
Butterfly Base (61).
Route the Long Cable (73) under a 3 1/2” Pulley (5)
as shown. Attach the Pulley and a Cable Trap (39) to
the indicated bracket on the Butterfly Base (61) with a
3/8” x 2” Bolt (35) and a 3/8” Nylon Locknut (4).
Make
sure the Cable Trap is oriented as shown.
20
19
4
64
22
72
34
77
72
2
9
21
61
5
73
Cable
Guide
39
4
35
43
11
16
72
43
11
16