Weider Pro 9935 English Manual - Page 10
Arm Assembly
View all Weider Pro 9935 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
15. Attach each of the four Weight Guides (15) to the Weight Top Frame (66) with a 3/8Ó x 3 3/4Ó Bolt (59), a 3/8Ó Flat Washer (48), and a 3/8Ó Nylon Locknut (50). Important: Go back and fully tighten all Nylon Locknuts used in steps 1 through 15. 15 59 48 59 15 50 50 48 15 Arm Assembly 16 16. Locate and open the parts bag labeled ÒARM ASSEMBLY.Ó Press a Plastic Bushing (100) onto each welded tube on the Press Frame (8). Lubricate the 3/8Ó x 8Ó Bolt (52). Attach the Press Frame (8) to the welded tubes on the Press Base (6) with the Bolt and a 3/8Ó Nylon Locknut (50). Do not overtighten the Nylon Locknut; it must be easy to pivot the Press Frame. 17. Press a 1 3/4Ó Square Inner Cap (35) into the top of a 17 Press Arm (77). Press a 1Ó Round Inner Cap (76) into the indicated hole in the Press Arm. Attach the Press Arm (77) to the bracket on the Press Frame (8) with two 5/16Ó x 2 1/2Ó Bolts (87) and two 5/16Ó Nylon Locknuts (64). Repeat this step to assemble the second Press Arm (77, not shown). 8 8 50 6 Lubricate 100 Welded Tube 52 35 76 64 87 77 10