Weider Speed Wt 120 English Manual - Page 5
Tray Frame 3.
 |
View all Weider Speed Wt 120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
2. Orient the Tray Frame (3) as shown. Attach the Tray Frame to the Uprights (2) with four 2 6 M10 x 65mm Screws (6). 3 See step 1. Tighten the four M10 x 65mm 6 Screws (6). 2 2 3. Orient a Tray (9) as shown. Attach the Tray to the Tray Frame (3) with eight M4 x 20mm Screws (7); start all eight Screws, and then tighten them. Next, set a Handle (8) with eight Weight Plates (10, 11, 12) on the Tray (9). Repeat this step on the other side of the Tray Frame (3). 3 8 12 11 10 10 11 9 3 7 7 4. Make sure that all parts are properly tightened before you use the dumbbells and stand. Note: Extra hardware may be left over. Place a mat beneath the stand to protect the floor. 5
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
5
7
7
3
9
8
11
11
10
10
12
3.
Orient a Tray (9) as shown. Attach the Tray
to the Tray Frame (3) with eight M4 x 20mm
Screws (7);
start all eight Screws, and
then tighten them.
Next, set a Handle (8) with eight Weight
Plates (10, 11, 12) on the Tray (9).
Repeat this step on the other side of the
Tray Frame (3).
4.
Make sure that all parts are properly tightened before you use the dumbbells and stand.
Note: Extra
hardware may be left over. Place a mat beneath the stand to protect the floor.
3
2
3
6
2
6
2.
Orient the Tray Frame (3) as shown. Attach
the Tray Frame to the Uprights (2) with four
M10 x 65mm Screws (6).
See step 1.
Tighten the four M10 x 65mm
Screws (6).
2