Weider Weevsy30810 English Manual - Page 6

ASSEMBLY • Assembly requires two persons. • Because of its weight and size, assemble the weight system in the location where it will be used. Make sure that there is enough clearance to walk around the weight system. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you complete all assembly steps. • To identify small parts, see page 5. • In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one standard screwdriver one rubber mallet two adjustable wrenches Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. The Four Stages of the Assembly Process Frame Assembly-You will begin by assembling the base and the uprights that form the skeleton of the weight system. Arm Assembly-During this stage you will assemble the arms and the leg lever. Cable Assembly-During this stage you will attach the cables and pulleys that connect the arms to the weights. Seat Assembly-During the final stage you will assemble the seat and the backrest. 6