Weslo 16 Instruction Manual - Page 7

2. Attach the Handrails (69) to the Uprights (73) with four M10 x 45mm Bolts (2). Start all four 2 Bolts, and then tighten each of them. 2 73 69 69 2 3. With the help of a second person, hold the console assembly near the Uprights (73). Remove 3 the tie from the Upright Wire (71). Console Assembly  Connect the Upright Wire (71) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Insert the connectors and the excess wire into the crossbar on the Uprights (73). 71 Console Wire Console Wire 73 Tie 71 4. Attach the console assembly to the Uprights (73) and the Handrails (69) with six M4.2 x 19mm 4 Screws (3). Be careful not to pinch the wires. Console Assembly 73 69 3 3 77 3 69