Weslo Cadence 630 Uk Manual - Page 5

ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the included allen wrench and your own phillips screwdriver , adjustable spanners , and 9/16" socket spanner . WARNING: Do not plug in the power cord until the treadmill is completely assembled. 1 29 1. Using two adjustable spanners, attach the Wheels (15) to the Base (71) with the two Wheel Bolts (14) and the two Wheel Nuts (29) as shown. Do not overtighten the Wheel Bolts; the Wheels should turn freely. 15 14 14 15 71 29 2. With the help of a second person, carefully raise the 2 Right and Left Handrails (6, 7) to the position shown. 7 6 3. With the help of a second person, carefully tip the tread- 3 mill onto its left side. Hold the Base (71) against the Right Handrail (6) and the Left Handrail (not shown). Make sure that the Wheels (15) are toward the front of the treadmill as shown. Using a 9/16" socket spanner, attach the Base (71) to the Right Handrail (6) with two Handrail Bolts (12), two Handrail Washers (31), and two Handrail Nuts (17). Do not tighten the Handrail Nuts yet. Attach the Base to the Left Handrail (not shown) in the same way. Tighten all four Handrail Nuts. Tip the treadmill back to the position shown in step 1. 5 12 15 17 6 31 71