Weslo Cadence 805 English Manual - Page 11

minutes. Repeat

Page 11 highlights

5. SYMPTOM: THE WALKING BELT IS OFF-CENTER WHEN WALKED ON a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD. Using the alien wrench, turn the rear roller adjustment bolt clockwise 1/4 of a turn. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered. b. If the walking belt has shifted to the right, first remove the key b and UNPLUG THE POWER CORD. Using the allen wrench, turn the rear roller adjustment bolt counterclockwise 1/4 of a turn. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered. STORAGE Unplug the power cord when the treadmill is not in use. Remove the bolt and nut from the lower end of each handrail. Remove the bolt from the upper end of each handrail. Remove O Remove the bolt and washer from the lower end of the upright. Lay the upright on the treadmill. Keep allbolts and washers in a secure location. Remove the batteries from the console and cover the treadmill during extended periods of storage. Remove Remove 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

5.
SYMPTOM:
THE
WALKING
BELT
IS
OFF
-CENTER
WHEN
WALKED
ON
a.
If
the
walking
belt
has
shifted
to
the
left,
first
remove
the
key
and
UNPLUG
THE
POWER
CORD.
Using
the
alien
wrench,
turn
the
rear
roller
adjustment
bolt
clockwise
1/4
of
a
turn.
Plug
in
the
power
cord,
insert
the
key
and
run
the
treadmill
for
a
few
min-
utes.
Repeat
until
the
walking
belt
is
centered.
b.
If
the
walking
belt
has
shifted
to
the
right,
first
remove
the
key
and
UNPLUG
THE
POWER
CORD.
Using
the
allen
wrench,
turn
the
rear
roller
adjustment
bolt
counterclockwise
1/4
of
a
turn.
Plug
in
the
power
cord,
insert
the
key
and
run
the
treadmill
for
a
few
minutes. Repeat
until
the
walking
belt
is
centered.
STORAGE
Unplug
the
power
cord
when
the
treadmill
is
not
in
use.
Remove
the
bolt
and
nut
from
the
lower
end
of
each
handrail.
Remove
the
bolt
from
the
upper
end
of
each
handrail.
Remove
the
bolt
and
washer
from
the
lower
end
of
the
upright.
Lay
the
upright
on
the
treadmill.
Keep
all
bolts
and
washers
in
a
secure
location.
Remove
the
batteries
from
the
console
and
cover
the
treadmill
dur-
ing
extended
periods
of
storage.
b
Remove
Remove
O
Remove
11