Weslo Cadence 840 English Manual - Page 10

Trouble, Shooting, Storage

Page 10 highlights

TROUBLE-SHOOTING AND STORAGE Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies to your treadmill and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). 1. SYMPTOM: THE POWER DOES NOT TURN ON a. Make sure that the power cord is plugged into a properly grounded outlet. (See OPERATION AND ADJUSTMENT in this manual.) If an extension cord is needed, use only a 14-gauge general-purpose cord of five feet or less in length. b. After the power cord has been plugged in, make sure that the safety key is fully inserted into the console. Various indicators on the console should light. (See OPERATION AND ADJUSTMENT in this manual.) c. Check the circuit breaker located on the treadmill frame near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in. 2. SYMPTOM: THE POWER TURNS OFF DURING USE Tripped Reset a. Check the circuit breaker located on the treadmill frame near the power cord. If the circuit breaker has tripped, the switch will protrude. (See the drawing above.) To reset the circuit breaker, wait for five minutes and then press the switch back in. b. Make sure that the power cord is plugged in. c. Remove the safety key from the console. Reinsert the safety key fully into the console. Various indicators on the console should light. 3. SYMPTOM: THE PULSE EARCLIP DOES NOT FUNCTION PROPERLY a. Make sure that the pulse earclip is plugged fully into the jack on the console. Rub your left ear lobe and reposition the earclip. Attach the clothes clip to your collar. b. Stand still while measuring your pulse. c. The pulse earclip may need to be cleaned. Press the earclip open, and find the two clear circles inside the earclip. Wipe the two clear circles using a cotton swab saturated with denatured alcohol. AWARNING•. The pulse earclip is not a medical device. Various factors, including the user's movement while exercising, may affect the accuracy of heart rate readings. The earclip is intended only as an exercise aid In determining heart rate trends In general. 4. SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON a. Apply silicone lubricant to the walking platform before use. Reapply lubricant after every 10 hours of use, and whenever a decrease in performance is noticed. (Uni•Sport silicone spray is recommended.) CAUTION: UNPLUG THE POWER CORD WHEN APPLYING LUBRICANT. 10 (See OPERATION AND ADJUSTMENT in this manual for application instructions.)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

TROUBLE
-SHOOTING
AND
STORAGE
Most
treadmill
problems
can
be
solved
by
following
the
simple
steps
below.
Find
the
symptom
that
applies
to
your
treadmill
and
follow
the
steps
listed.
If
further
assistance
is
needed,
please
call
our
Customer
Service
Department
toll
-free
at
1-800-999-3756,
Monday
through
Friday,
6
a.m.
until
6
p.m.
Mountain
Time
(excluding
holidays).
1.
SYMPTOM:
THE
POWER
DOES
NOT
TURN
ON
a.
Make
sure
that
the
power
cord
is
plugged
into
a
properly
grounded
outlet.
(See
OPERATION
AND
ADJUSTMENT
in
this
manual.)
If
an
extension
cord
is
needed,
use
only
a
14
-gauge
gener-
al-purpose
cord
of
five
feet
or
less
in
length.
b.
After
the
power
cord
has
been
plugged
in,
make
sure
that
the
safety
key
is
fully
inserted
into
the
console.
Various
indicators
on
the
console
should
light.
(See
OPERATION
AND
ADJUSTMENT
in
this
manual.)
c.
Check
the
circuit
breaker
located
on
the
treadmill
frame
near
the
power
cord.
If
the
switch
protrudes
as
shown,
the
circuit
breaker
has
tripped.
To
reset
the
circuit
breaker,
wait
for
five
minutes
and
then
press
the
switch
back
in.
10
2.
SYMPTOM:
THE
POWER
TURNS
OFF
DURING
USE
Tripped
Reset
a.
Check
the
circuit
breaker
located
on
the
treadmill
frame
near
the
power
cord.
If
the
circuit
break-
er
has
tripped,
the
switch
will
protrude.
(See
the
drawing
above.)
To
reset
the
circuit
breaker,
wait
for
five
minutes
and
then
press
the
switch
back
in.
b.
Make
sure
that
the
power
cord
is
plugged
in.
c.
Remove
the
safety
key
from
the
console.
Reinsert
the
safety
key
fully
into
the
console.
Various
indicators
on
the
console
should
light.
3.
SYMPTOM:
THE
PULSE
EARCLIP
DOES
NOT
FUNCTION
PROPERLY
a.
Make
sure
that
the
pulse
earclip
is
plugged
fully
into
the
jack
on
the
console.
Rub
your
left
ear
lobe
and
reposition
the
earclip.
Attach
the
clothes
clip
to
your
collar.
b.
Stand
still
while
measuring
your
pulse.
c.
The
pulse
earclip
may
need
to
be
cleaned.
Press
the
earclip
open,
and
find
the
two
clear
circles
inside
the
earclip.
Wipe
the
two
clear
circles
using
a
cotton
swab
saturated
with
denatured
alco-
hol.
AWARNING•.
The
pulse
earclip
is
not
a
medical
device.
Various
factors,
including
the
user's
movement
while
exercising,
may
affect
the
accuracy
of
heart
rate
readings.
The
earclip
is
intended
only
as
an
exercise
aid
In
determining
heart
rate
trends
In
general.
4.
SYMPTOM:
THE
WALKING
BELT
SLOWS
WHEN
WALKED
ON
a.
Apply
silicone
lubricant
to
the
walking
platform
before
use.
Reapply
lubricant
after
every
10
hours
of
use,
and
whenever
a
decrease
in
performance
is
noticed.
(Uni•Sport
silicone
spray
is
recommended.)
CAUTION:
UNPLUG
THE
POWER
CORD
WHEN
APPLYING
LUBRICANT.
(See
OPERATION
AND
ADJUSTMENT
in
this
manual
for
application
instructions.)