Weslo Cadence C6 Treadmill Uk Manual - Page 11
Attach the Latch Assembly 48 to the Left
View all Weslo Cadence C6 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
11. See the lower drawing. Position the Uprights 11 (53, 54) so that the treadmill Frame (51) is cen- tered between the Uprights. Firmly tighten the two Frame Bolts (1) and the four Upright Bolts (2). Be careful not to overtighten the Frame Bolts. 1 2 51 Top View 54 51 53 12. Attach the Latch Assembly (48) to the Left Upright (53) with two Latch Screws (95); start 12 both Latch Screws before tightening either of them. 48 53 95 13. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place. The hex key is used to adjust the walking belt (see page 19). To protect the floor or carpet, place a mat under the treadmill. 11
11
11
13.
Make sure that all parts are properly tightened before you use the treadmill.
Keep the included hex key
in a secure place. The hex key is used to adjust the walking belt (see page 19). To protect the floor or carpet,
place a mat under the treadmill.
12. Attach the Latch Assembly (48) to the Left
Upright (53) with two Latch Screws (95);
start
both Latch Screws before tightening either
of them.
95
48
53
12
11. See the lower drawing. Position the Uprights
(53, 54) so that the treadmill Frame (51) is cen-
tered between the Uprights.
Firmly tighten the two Frame Bolts (1) and the
four Upright Bolts (2).
Be careful not to over-
tighten the Frame Bolts.
11
2
51
1
53
51
54
Top View