Weslo Cadence J2.8 Treadmill Canadian English Manual - Page 5
Assembly
View all Weslo Cadence J2.8 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Do not remove the long plastic tape inside the Right Handrail until told to. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the included allen wrench and your own phillips screwdriver , adjustable wrenches , and 9/16" socket wrench , wire cutters . Note: To identify small parts used during assembly, see the PART IDENTIFICATION CHART in the center of this manual. 1. Hold the Base (71) in the position shown. Identify the Right Handrail (6), which has a large hole near the lower end. Hold the Right Handrail with the bend in the position shown. ! • Hazardous Voltage • Risk of Electric Shock • Unplug Treadmill before Assembly/ Disassembly ! ATTENTION • Tension Dangereuse • Risque de Choc Électrique • Débranchez le tapis roulant Avant l'Assemblage/Désassemblage Using a 9/16" socket wrench and the included allen wrench, attach the Right Handrail (6) to the Base (71) with two Handrail Bolts (12), two Formed Washers (31), and two Nuts (17). Do not tighten the Handrail Nuts yet. Attach the Left Handrail (7) to the Base (71) in the same way. 1 7 6 Large Hole 71 12 17 12 31 Bend 2. Position the treadmill near the Handrails (6, 7) as shown. A 2 long plastic tape is inside the Right Handrail (6). Secure the end of the plastic tape to the Wire Harness (22) with the included plastic tie. Pull on the other end of the tape to pull the Wire Harness through the Right Handrail and out of the top. With the help of a second person, raise the Handrails (6, 7) so that the Base (71) is resting flat on the floor. 7 6 71 22 Tape Tie 6 22 5