Weslo Cadence J3.8 Treadmill User Manual - Page 10

9. Attach the Console (91) to the Right Upright (54) 9 and the Left Upright (53) with six Handrail Bolts (8) and six Handrail Star Washers (5). Make sure that no wires are pinched. Start all six Handrail Bolts before tightening any of them. With the help of a second person, carefully lower the Uprights (53, 54) to the floor. See the drawing in step 11. 91 8 5 58 54 10. Attach the ground wire on the Wire Harness (39) to the indicated hole in the Base (52) with a 10 Ground Screw (84). 52 5 8 5 53 8 Ground Wire Hole 39 84 11. See the lower drawing. Position the Uprights 11 (53, 54) so that the treadmill Frame (51) is cen- tered between the Uprights. Firmly tighten the two Colored Patch Frame Bolts (1) and the four Upright Bolts (2) (only one side is shown). Be careful not to overtighten the Colored Patch Frame Bolts. Raise the Uprights (53, 54) to the vertical position. 1 2 51 Top View 10