Weslo Gym 2000 Owners Manual - Page 8
permanently
View all Weslo Gym 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
c. If the walking belt is overtightened, treadmill performance may be reduced and the walking belt permanently damaged. TURN THE POWER OFF. Turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. Repeat until the tension of the walking belt is correct. When the tension is correct, you should be able to lift each side of the walking belt 2-3 inches off the walking platform. The center of the walking belt should remain just at the surface of the walking platform. Be careful to keep the walking belt centered on the walking platform. 2"-3" 5. SYMPTOM: THE WALKING BELT IS OFF-CENTER OR SLIPS WHEN WALKED ON a. If the walking belt has shifted to the left, first TURN THE POWER OFF. Turn the left rear roller adjustment bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn each. Repeat as necessary until the walking belt is centered. b. If the walking belt has shifted to the right, first TURN THE POWER OFF. Turn the left rear roller adjustment bolt counterclockwise, and the right bolt clockwise, 1/4 of a turn each. Repeat as necessary until the walking belt is centered. c. If the walking belt slips when walked on, first TURN THE POWER OFF. Turn both rear roller adjustment bolts clockwise, 1/4 of a turn. Repeat as necessary until the tension of the walking belt is correct. When the tension is correct, you should be able to lift each side of the walking belt 2-3 inches off the walking platform. The center of the walking belt should remain just at the surface of the walking platform. Be careful to keep the walking belt centered on the walking platform. STORAGE Unplug the power cord when the treadmill is not in use. Remove the bolts and nuts from the lower and upper ends of the handrail. Keep the bolts and nuts in a secure location. Loosen the lock knob and lower the upright post onto the walking belt. Lay the handrail on the treadmill. 8