Weslo Massage Chair8 Mtr English Manual - Page 7
How To Use The Automatic Modes Full
View all Weslo Massage Chair8 Mtr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. The massage chair features three separate massage zones: the upper back, lower back, and thigh zones. The massage zones are controlled with the Upper Back, Lower Back, and Thigh buttons. Pressing a button once will activate a massage zone. Pressing the button again will turn off the massage zone. Press the buttons to activate the desired massage zones. 3. After you have activated the desired massage zones, press the Intensity + or Ð buttons to adjust the intensity of the vibrating massage action. Note: If no buttons on the hand control are pressed for twenty minutes, the vibrating massage action will automatically stop. To restart the massage action, follow steps 1 through 3 above. HOW TO USE THE AUTOMATIC MODES (FULL BODY WAVE, FULL BODY PULSE, AND UPPER BODY WAVE) 1. Press the Mode button repeatedly to select the desired mode. A mode indicator will light to show which mode is selected. When Full Body Wave is selected, the upper body, lower body, and thigh zones will be activated in sequence, producing a wave-like massage motion. When Full Body Pulse is selected, the upper body, lower body, and thigh zones will be activated together with a pulsing motion. The Upper Body Wave is similar to the Full Body Wave, but only the upper body and lower body zones will be activated. 2. After you have selected the desired mode, press the Speed and Intensity buttons to adjust the speed and intensity of the vibrating massage action. Note: If no buttons on the hand control are pressed for twenty minutes, the vibrating massage action will automatically stop. To restart the massage action, follow steps 1 and 2 above. HOW TO ACTIVATE THE BUILT-IN HEATER Whether the Manual mode or one of the automatic modes is selected, you can add soothing heat to your massage, if desired. To turn on the heater, press the Heater button. The Heater indicator will light. Press the button again when you want to turn off the heater. Note: When the heater is on, the maximum intensity setting of the vibrating massage action will be lower. Therefore, the intensity may decrease slightly when the heater is turned on. Note: If no buttons on the hand control are pressed for twenty minutes, the heater will automatically turn off. To turn on the heater, follow the instructions above. HOW TO TURN OFF THE POWER To turn off the power, slide the power switch to the ÒoffÓ position. The power indicator will darken. HAND CONTROL TROUBLE-SHOOTING If the hand control does not function properly, make sure that the transformer on the power cord is plugged into a 120-volt outlet. In addition, make sure that the hand control is properly connected to the massage pad (see assembly step 3 on page 5). 7