WestBend EM925AJWP2 Instruction Manual - Page 13
Memory Function, Dinner Plate, Pizza
View all WestBend EM925AJWP2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
12. DINNER PLATE a) Press " DINNER PLATE " repeatedly until the number you wish appears in the display, "9.0","12.0","18.0" oz will display in order. For example, press "DINNER PLATE" once, "9.0" appears. b) Press " START/+30 SEC. " to cook, buzzer sounds once. When cooking finish, buzzer sounds five times and then turn back to waiting state. 13. PIZZA a) Press " PIZZA " repeatedly until the number you wish appears in the display, "4.0","8.0","14.0" oz will display in order. For example, press "PIZZA" once, "4.0" appears. b) Press " START/+30 SEC. " to cook, buzzer sounds once. When cooking finish, buzzer sounds five times and then turn back to waiting state. 14. MEMORY FUNCTION (1) Press "0/MEMORY" to choose memory setting 1-3. The LED will display 1,2,3. (2) If the setting has been programmed, press " START/ +30 SEC." to use it. If not, continue to choose the setting. Only one or two stages can be set. (3) After finishing the setting, press "START/ +30 SEC." once to save the setting. If press " START/ +30 SEC." again, it will start cooking. Example: to program the following setting as the second memory, that is memory 2, to cook the food with 80% microwave power for 3 minutes and 20 seconds. The steps are as follows: a. In waiting states, press "0/MEMORY" twice, stop pressing until the screen displays "2". b.Press "TIME COOK" once, then press "3","2","0" in order. c. Press "POWER" once, "PL10" displays, then press "8" and "PL8" displays. d. Press "START/ +30 SEC." to save the setting. Buzzer sounds once and the LED will display "2". If you press "START/+30SEC." again, the setting will be saved as memory 2 and operated. e. If the electricity is not cut off, the setting will be saved all the time. If power goes out, the setting will need to be reprogrammed . f. If you want to run the saved setting, in waiting state, press "0/MEMORY" twice, screen displays "2", then press "START/+30SEC." to run. English-13